Inga produkter
Visa större
Monitor Audio Gold FX
Ny produkt
Dipol/Bipol Surroundhögtalare för den riktiga hemmabioentusiasten från Monitor Audio i Gold-serien. Finns i flera olika färgutföranden.
beställningsvara
Mer info
Gold Series är en högpresterande serie högtalare.Ett givet val för alla som ställer de allra högsta kraven på högtalare oavsett om det är till HiFi- eller Hemmabiosystem.
Finish: Dark Walnut (Mörk Valnöt I äkta träfanér) Black Piano - White Piano Ebony Piano (Ebenholts) mot pristillägg
Surroundhögtalare 2-vägs Sluten Dual-mode: Dipol/Bipol
6,5" C-CAM bas GX banddiskant
Dubbla 4" mellanregister
2 x C-CAM diskanter
60Hz – 60kHz, 87dB,
8 Ohm
Finish: Dark Walnut, Black Piano & White Piano
Höjd x Bredd x Djup: 310 x 390 x 160mm inkl. terminaler 11,9 kg/st
In monopole mode for discrete side or rear sound channels its front-firing 61/2" RST bass/mid-driver and C-CAM ribbon transducer deliver accurate ultra-wideband sound to match the tonal balance of any 'Gold' speaker combination.
In dipole mode the Gold FX uses two pairs of side firing 4" C-CAM bass/mid drivers and 25 mm C-CAM gold-dome tweeters, combined with the tailored output from the front-firing bass/mid driver to provide wonderfully diffuse yet tonally precise surround effects. The Gold FX can be flush-mounted on side or rear walls. Installation is made easy by the inclusion of a 'sloppy fit' wall bracket, which allows levelling and adjustment prior to fixing.
Technology
- C-CAM (Ceramic-Coated Aluminium/Magnesium) ribbon transducer design – providing extension to a class leading 60 kHz
- Single bolt through driver fixings for improved bracing, rigidity and driver/baffle de-coupling
- New C-CAM RST (Rigid Surface Technology) drivers
- Die-cast alloy terminal panel arrangement with high quality bi-wire terminals and high end spade type link cables
- Pureflow silver internal cabling
- Selected premium quality wood veneer or high gloss lacquer finishes
- Rigid 20 mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet colouration.
System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
